A poem from Yellowrocket by Todd Boss

Todd Boss reads "How It Must Have Been for Him," a poem from Yellowrocket, published by Norton in November. Boss is one of twelve poets featured in "First and Foremost" (January/February 2009), our fourth annual roundup of debut poets.

 

AttachmentSize
Audio icon 02_Track_02.mp31.72 MB

Pass-Along Poems

by
Staff
4.22.09

Spread the word about debut poets and their work with this Pass-Along Poems chapbook. We’ve compiled poems from each of the twelve poets featured in our fourth annual roundup, “First and Foremost,” in the January/February 2009 issue of Poets & Writers Magazine. Use these instructions to print, assemble, and bind several of your own handcrafted, saddle-stitched editions. Remember to use a heavy stationery for the interior pages and a card stock for the covers. For an extra touch, forgo the stapler and use needle and thread instead. Add your recommendations for first-time poets on the back pages, and while you’re at it, paste in your own polished, unpublished work or that of others you admire.

Pass Along Poems

Download a PDF of the chapbook here.

DIY: How to Make a Saddle-Stitched Chapbook

A companion to our special section on independent presses.

Figure A

Image: 

1. Format and design your short poetry or prose manuscript using word processing software such as Microsoft Word, or a desktop publishing program such as QuarkXPress or Adobe InDesign, or by cutting and pasting your text onto the pages (use scrapbook paste; regular glue will cause buckling). Create eye-catching covers using found images, rubber stamps, or—for a minimalist, vintage look—a serif display font on a letterpress. Regardless of which method you use to lay out your book, the pages must be formatted in four-page signatures, a special configuration that ensures the bound pages will end up arranged in numerical order (fig. A). You may want to create a mock-up version using standard paper to ensure your pages are formatted properly.

2. For your final book, use an 8 1/2 x 11–inch stock of medium thickness for the body (a thicker page will cause bowing). Print all the front sides first, then print on the back, making sure to feed the paper in the correct orientation (fig. A). The covers can be printed on the same paper or printed separately on a heavier color stock.

Figure B

Image: 

3. Cut each page in half horizontally (fig. B).

Figure C

Image: 

4. Fold each page in half vertically, creasing with a ruler or straightedge (fig. C).

Figure D

Image: 

5. Stack the pages so that page numbers appear in order, then staple along the middle (fig. D).

 *Makes a 4 1/4 x 5 1/2-inch book with thirty-two pages